Info: (update) Draftsight doesn't offer any more a free version.
Draftsight is a CAD software whose free version offers all the tools needed for a 2D design.
Here are presented some of the most common configurations along with some tips in the use of Draftsight.
To change the colour background in the Sheet Views:
Tools
> Options
> System Options
> Display
> Element Colors
> Sheet Background
.
To remove the dotted borders of the printable area in the Sheet Views:
Tools
> Options
> System Options
> Printing
> General options
and remove the tick from Display Printable area
.
To remove the paper background in the Sheet Views:
Tools
> Options
> System Options
> Printing
> General options
and remove the tick from Display paper background
.
To rotate a drawing in the Sheet View without changing its orientation in the Layout View, do as follows:
Tools
> New CCS
> 3 Point
, set the new orientation of the X-Y plane;planview
and choose the option Active CCS
to set the view according to the new CCS.
To come back to the 2D view after rotation of a 3D object:
View
> View Tiles
> 3D Views
> Plan View
> World CCS
.
An Xref is an external reference, that could be an image or a drawing. In the latter case, when it must be attached to another one, with Insert
> Attach Drawing
, it's important that the configurations of the two files are the same otherwise parameters'scale will be changed.
Let's suppose to have a file called xref.dwg
that must be attached to file.dwg
.
The easy way to copy all the configurations is to:
xref.dwg
and call it file.dwg
;file.dwg
, delete and clean its content, than attach xref.dwg
.The leader dimension allows labeling objects so that the annotation and the pointing line are bounded by one another.
Best results are obtained with the following configuration:
Tip: If the text and the pointing line, or the frame, are not correctly bounded, just replace the text around to let them re-synchronize.
Only in multiline mode, it's possible to write super- and sub- script text, with any character and font, using the carriage ^
.
For subscript code:
^
before the text: ^sub
;Stack/Unstack
button.For superscript code:
^
after the text: super^
;Stack/Unstack
button.